Victron Blue Smart IP22 Charger 24V/16A

* Images may differ from the actual product.

Vat Calculated at Checkout

Product Features

Charger
The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

Bluetooth Smart
The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency
With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard.
And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Fully programmable charge algorithm
Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app.
After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm.

Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalise’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure.

Also charges Li-ion batteries
Li-ion batteries are charged with a simple bulk – absorption – float algorithm.

Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating
Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION.

Forty cycle history log
The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles.

VE.Smart Networking
The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart.

Optional battery voltage and temperature compensation, and current sensing
The VE.Smart Network opens the possibility to optimise the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current.

Synchronised parallel charging
Synchronise up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronise the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption.
Synchronised parallel charging has several interesting advantages:

  • Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate.
  • Flexibility: simply add a charger to the network if more current is needed.
  • Cost: several low power chargers will in general cost less than one high power charger.
  • Installation: several low power chargers may be easier to fit in a confined space.

Product Specifications

Weight 1.4 kg
Dimensions 6.5 × 10.8 × 23.5 cm

Product Data Sheet

Office: (044) 692 0229

9 Via Appie Street, Voorbaai, Mossel Bay

Product Enquiry Form

Omega Watt Approved Support

We are the approved installer and technical support agent for the following products along the Garden Route.
Please get in touch and let us know on which product that you require further support.

Omega Watt Solar Geysers Black Icon
Omega Watt Solar Geysers Black Icon
Omega Watt Solar Geysers Black Icon
Omega Watt Solar Geysers Black Icon
BSLBATT
Omega Watt Solar Geysers Black Icon
Freedomwon
Pylontech